Rascal R500 Series Owner's Manual download pdf (Page 21)

Rascal R6 300 Scooter Owner’s Manual

EMC Part: 19277200 • Rev. 06 • 09/04/2007

Seat Post Height Adjustment

If the scooter does not include the electric seat lift, the

seat height can be adjusted manually. The Seat Post tube

has 3 holes; this makes it adjustable so you can set the

seat height that is most comfortable for you. Seat height

adjustments are shown in Illustration 10.

Seat post has been factory-lubricated with petroleum

jelly for ease of movement. BE CAREFUL to keep

lubricated areas free from clothing, carpets, etc. to avoid

stains when adjusting seat height.

Illustration 10 — Seat Post Height

Adjustment

1. Remove the seat by holding Locking Lever backward

and lift the seat straight up and off the Seat Post

Assembly.

2. Unscrew the Nut and Bolt to release the Adjustable

Seat Post Tube from the base. Hold the Post with one

hand and pull the Bolt with the other hand.

3. Position the Adjustable Seat Post Tube to your

desired height and align the holes in the Seat Post

Base and Adjustable Seat Post Tube. Insert the bolt,

and secure the assembly by tightening the nut.

4. Replace the seat by holding the Locking Lever, insert

the seat onto the Seat Post Assembly, and release

the Locking Lever to lock the seat into place.

If desired, the 3/8-16 x 2" bolt and 3/8-16 lock nut can

be replaced with a Quick Release Pin, available through

our Customer Service Department.

SEAT POST

BASE

ADJUSTMENT

BOLT

SEAT POST

19271200/10

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 37 38

No comments

Rascal R500 Series Owner's Manual Page 21