Rascal AutoGo Owner's Manual download pdf (Page 16)

Rascal AutoGo Owner’s Manual

EMC Part: 19286400 Rev.01 03/09/07

Installing the Battery Pack

After the batteries have been fully charged, you’ll be ready to install the Battery Pack into the Tiller. Install the battery

pack as follows (see Illustration 3).

1. Lift the Battery Pack by the handle and insert the

bottom of the Battery Pack into the bottom of the

Tiller. Line up the slot under the pack with the bar on

lower shelf of tiller.

2. Firmly push the top front of the Battery Pack into the

tiller until it “snaps” in place. Ensure that the (5) pin

tiller connector mates tightly with the connector of the

Battery Pack.

3. Make sure the handle on the battery pack is fully

returned to its seated position to lock the Battery Pack

in place.

Illustration 3 — Battery Pack Installation

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 58 59

No comments

Rascal AutoGo Owner's Manual Page 16